MetalworkingFun Forum

Full Version: SloMo Wobbler
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3
A small ocsilating engine in slow motion






Just as a bit of info. It is running at about 700rpm, about 12 revs/second.


The real time length of the video clip is about 0.9 sec, if you count the revolutions it should be about 10 or 11.


Now wasn't that bluudy exciting Big GrinBig GrinBig Grin
Smiley-eatdrink004
DaveH
(02-28-2012, 01:41 PM)DaveH Wrote: [ -> ]A small ocsilating engine in slow motion






Just as a bit of info. It is running at about 700rpm, about 12 revs/second.


The real time length of the video clip is about 0.9 sec, if you count the revolutions it should be about 10 or 11.


Now wasn't that bluudy exciting Big GrinBig GrinBig Grin
Smiley-eatdrink004
DaveH

VERY NICE tom

Dave,

I assume you made that, is that correct?

Nice little engine that runs very nice. Smiley-signs107

Ed
Thanks Tom

Thanks Ed,

I made it all on a Sherline lathe and mill, I'm a bit of a fan of Sherline stuffSmileSmileSmile
Smiley-eatdrink004
DaveH
(02-28-2012, 04:10 PM)DaveH Wrote: [ -> ]I made it all on a Sherline lathe and mill, I'm a bit of a fan of Sherline stuffSmileSmileSmile
Smiley-eatdrink004
DaveH

Just goes to show you that size doesn't matter as long as it's a well made tool like a Sherline.

Ed
Just some pics.

On the Sherline cutting the fly wheel
[attachment=164]

[attachment=165]
Straight off the mill - still needs a bit of cleaning up
[attachment=166]

Shows the size
[attachment=167]

After a bit of spit and polish
[attachment=168]

Smiley-eatdrink004
DaveH
I never get tired of that little clip!Smiley-signs107

Dave how long to make something like that?

Jerry.Popcorn
Dave,

Did you make that angle plate that the 3-jaw chuck is mounted on?

Ed
(03-02-2012, 07:22 AM)EdAK Wrote: [ -> ]Dave,

Did you make that angle plate that the 3-jaw chuck is mounted on?

Ed
Hi Ed,

Yes I did, what I'll do is take some pics and start a new thread.
Smiley-eatdrink004
DaveH

Good idea Dave. Idea
Pages: 1 2 3