MetalworkingFun Forum

Full Version: Pan & Box Brake
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
I posted these pictures on another forum quite some time ago and someone asked me where they could get the plans, if available. At the time, I had lost the link to the web site where the pictures were posted. I ran across them today while searching for something unrelated so I thought I'd post them before I loose them again.

It was designed by Glenn Wilson and the plans are available in the book 'Metalworking Book 2: The Best of Projects In Metal'. It's a tough one to find since it's out of print.

Ed

[attachment=4000]

[attachment=4001]

[attachment=4002]

[attachment=4003]
Thanks for posting that Ed, i had seen that posted before somewere, a beautiful piece of work!!
(12-14-2012, 04:35 PM)sasquatch Wrote: [ -> ]a beautiful piece of work!!

Yes it is. It's in the league of Gerard's art pieces. Happyyes

Ed
Far too pretty to put in my shop. Yes another work of art.
It's definitely pretty, but I sure would like to have a pan and box brake so I'm going to see if I can find the book at a reasonable price and purchase it.

Ed
I took the easy way out and bought a 48 inch one a few years ago. Don't use it often now but sure handy when you do need it.
Yup, it's not one of those things that you need very often but when you do it sure is nice to have.

ed
beautiful work!!!!!
One of those has been on my to-do list for years. Too lazy I guess. But one isn't likely to fall into my lap, so I'll either hve to build one or buy one.
Rotfl
Smiley-signs009
Rotfl
DaveH
Pages: 1 2