(02-04-2013, 06:53 PM)stevec Wrote: [ -> ]Try the ultrasonic route Brian suggested. Are you on good terms with your Dentist? They have ultrasonic cleaning stuff.
That does seem like the best solution since I don't have a shop press. Oh, I don't have a ultrasonic cleaner either.
Ed
No Press, no problem, you must have a Big hammer. Im sure others have tried.
Used to be able to press drill chucks apart in a good size bench vise.
That would work, press apart, then press back together.
(02-04-2013, 06:53 PM)stevec Wrote: [ -> ]Try the ultrasonic route Brian suggested. Are you on good terms with your Dentist? They have ultrasonic cleaning stuff.
I would hate to be the next patient to be worked on after that move!
I've got an ultrasonic cleaner and I agree it would most likely dislodge all the "gunk" inside. But where is the room for the gunk to get
out?
And how do you get new grease
in?
And why am I talking like Headly Lamar?
(02-04-2013, 09:06 PM)Highpower Wrote: [ -> ]... But where is the room for the gunk to get out?
And how do you get new grease in?
My thought exactly. It may come out with the ultrasonic cleaner but how to get lubrication back in.
Ed