MetalworkingFun Forum

Full Version: Atlas 6" x 48" horizontal fence information.
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Well guys picked up a 1945 Atlas 6" x 48" belt sander in fair condition. Right now I am in the process of cleaning it up, replacing some bearings, and painting. I should have pictures to follow in a week or so. Anyway I was able to find some of the original documentation on the sander on the web, actually a publication dated 5-15-62, so they must have made the same unit for a long time, which shows the sander and some fences that came with it. The fences were used when the sander is in the horizontal position, and consist of a slide fixture, and bolt. Actually it shows two fences, a cross fence and a parallel fence. Here are a couple of pictures from the documentation of the fences [attachment=5904][attachment=5905]

Does anyone out there have these two fences and attachment hardware? If so could I get some dimensions as to the length and height of the two fences, the length and height of the mounting brackets. I am sure with those measurement I can fabricate the parts myself.

So if you could take the time and help me out I would appreciate it.

M.L. Woy
I look forward to seeing the pictures. Always good to see old iron get a new lease on life.
(08-09-2013, 10:08 PM)Mayhem Wrote: [ -> ]Always good to see old iron get a new lease on life.
Or, in the case of Atlas "old white metal". Rotfl
Great sander buy, i would buy one too if i ever found one.