Can be used for a radius cutter also. It will do a 3 1/2" ball on my 10" and prob a 6" ball on my 15". I have all the plans or you can get them off google but i have better pictures of some of the parts...Bob
Bob,
Could you please upload the plans to the "Files Section"? I would be interested in seeing those plans.
Thanks,
Ed
I will but i am going to need some tech help converting the articles to something that i can use here. Here is where i keep them if you want to have a look and figure something out.
http://groups.yahoo.com/group/southbend1...%20turner/ The pictures are mine and i can load the here...Bob
Hi Bob
Now thats a dam clever idea
nicely done
Rob
(03-24-2012, 01:19 PM)aametalmaster Wrote: [ -> ]I will but i am going to need some tech help converting the articles to something that i can use here. Here is where i keep them if you want to have a look and figure something out.
http://groups.yahoo.com/group/southbend1...%20turner/ The pictures are mine and i can load the here...Bob
Unfortunately those plans are have a copyright on them so we can not post them on the forum without first checking as to whether the copyright is still active.
Ed
Quote:Unfortunately those plans are have a copyright on them so we can not post them on the forum without first checking as to whether the copyright is still active.
Ed
OK. They are from 1962 and are everywhere on the web...Bob
(03-24-2012, 09:41 PM)aametalmaster Wrote: [ -> ]Quote:Unfortunately those plans are have a copyright on them so we can not post them on the forum without first checking as to whether the copyright is still active.
Ed
OK. They are from 1962 and are everywhere on the web...Bob
OK, let me dig into it a bit and I'll see what I can find out.
Ed
Here are some clearer pics of the blueprint since it wasn't too clear in some areas. I omitted the friction button and just went with a small piece of an old nylon bolt which was put in the threaded hole before the screw....Bob