hi a other job on the go is the conversion of this halogen machine lamp as fitting a led head light from the £1 shop cut the front out of the lamp machine the front cover to fit the glass then glue the led light cluster in sum pics to follow
I have one of those - very good
DaveH
hi well i cut two support pins from the inside to fit a pp9 and wired it all up it worker then i noticed something burning the on bored resister cud not handel 9 volts so will have to remove the other two pins and fit the original battery box pics
Hi Bob, thanks for posting ............ very enlightening
Cheers Mick
(07-31-2014, 04:41 PM)DaveH Wrote: [ -> ]I have one of those - very good
DaveH
U talking about LED LIGHTS, right ???
where'd U get Yours from DAVE, if I may ask
We need a couple badly for some machines
Pray do tell
TIA
aRM
(08-07-2015, 10:11 AM)aRM Wrote: [ -> ] (07-31-2014, 04:41 PM)DaveH Wrote: [ -> ]I have one of those - very good
DaveH
U talking about LED LIGHTS, right ???
where'd U get Yours from DAVE, if I may ask
We need a couple badly for some machines
Pray do tell
TIA
aRM
From Toolquip before it became Toolquip and Allied many years ago (20?). It originally used a 12v 20w halogen lamp, I just changed the lamp to a 12v 5 w LED with the same base, plugged it in and switched it on
No idea if the same model is still available but similar ones are.
DaveH