MetalworkingFun Forum

here is a photo of a boring bar that I said the next time I was in the store I would see about taking a photo of it. I had mentioned that it was 4" in dia. I was wrong its 3 inches in diameter and roughly 4 feet long.

its carbide is what I was told and from the scared up sticker on it the max load is 7000 N at 75 degrees C

[attachment=9734]

Now that's a MAN'S boring bar!

I was going to pick it up for use on my 7X12 but figured that I'd probably just break it.

DA

(12-22-2014, 08:04 PM)dallen Wrote: [ -> ]I was going to pick it up for use on my 7X12 but figured that I'd probably just break it.

DA

I don't think so Dave.  That bar looks solid enough to withstand use on your 7x12

(12-22-2014, 11:24 PM)Mayhem Wrote: [ -> ]

(12-22-2014, 08:04 PM)dallen Wrote: [ -> ]I was going to pick it up for use on my 7X12 but figured that I'd probably just break it.

DA

I don't think so Dave.  That bar looks solid enough to withstand use on your 7x12

I think he meant that he'd break the 7X12