01-15-2015, 06:36 PM
01-15-2015, 06:58 PM
01-16-2015, 06:40 PM
hey guys i didnt do any polishing today i was to busy
i did start sanding a new piece tho
doing this type of sanding i have been doing it by hand
so much effort today i just didnt have the energy can i use a power sander on this type of aluminum
i have a few different types i got the belt sander, and attached to it also has a rotating dis sander.....
also i got a handheld one that doesnt spin you put a square piece on and it vibrates (i dont know the name of this type of sander)
i have been told doing it by hand is alot better i was thinking of maybe doing the lower grits with the power hand held one
then the last 2 (finer grits) by hand ........any suggestions?
i know i am looking for a short cut just wiped out today and it was a thought but i dont know if i should go that route or not i have never sanded this type of metal with power????
i did start sanding a new piece tho
doing this type of sanding i have been doing it by hand
so much effort today i just didnt have the energy can i use a power sander on this type of aluminum
i have a few different types i got the belt sander, and attached to it also has a rotating dis sander.....
also i got a handheld one that doesnt spin you put a square piece on and it vibrates (i dont know the name of this type of sander)
i have been told doing it by hand is alot better i was thinking of maybe doing the lower grits with the power hand held one
then the last 2 (finer grits) by hand ........any suggestions?
i know i am looking for a short cut just wiped out today and it was a thought but i dont know if i should go that route or not i have never sanded this type of metal with power????
01-16-2015, 06:55 PM
Dave,
Try it on a small sample and see how it turns out. I have one of these that might work well.
http://www.homedepot.com/p/Ryobi-Detail-...5yc1vZc29d
Ed
Try it on a small sample and see how it turns out. I have one of these that might work well.
http://www.homedepot.com/p/Ryobi-Detail-...5yc1vZc29d
Ed
01-16-2015, 06:56 PM
Hi Dave - nothing wrong with trying to find an easier way, sometimes it can turn out to be a better way.
Me - I would try anything I had.
First try it out on a bit of scrap and now you are looking at power tools THINK SAFETY you don't want it flying across the room.
You also need to think about SELF SAFETY. - hands and face especially.
Go for it. See which one suits best.
DaveH
Me - I would try anything I had.
First try it out on a bit of scrap and now you are looking at power tools THINK SAFETY you don't want it flying across the room.
You also need to think about SELF SAFETY. - hands and face especially.
Go for it. See which one suits best.
DaveH
01-16-2015, 07:12 PM
http://www.homedepot.com/p/Ryobi-2-Amp-1...5yc1vZc28s
i have something similar to this not exactly but very close.
what i was most worried out is maybe the sander heating up the aluminum to much in the process.
but if i use scap you right cant ruin scap so we will see tomorow to tired tonight
i have something similar to this not exactly but very close.
what i was most worried out is maybe the sander heating up the aluminum to much in the process.
but if i use scap you right cant ruin scap so we will see tomorow to tired tonight
01-16-2015, 07:20 PM
hey if i try the power hand held sander you guys think i should still put a bunch of water down on the piece and some on the paper or not ???
01-16-2015, 07:23 PM
It will heat up quite quickly - keep a gentle light touch.
Allow it to cool down every now and then.
Unless the sander is completely 100% water proof you cannot use any water - unless you have a death wish
DaveH
Allow it to cool down every now and then.
Unless the sander is completely 100% water proof you cannot use any water - unless you have a death wish
DaveH
01-16-2015, 07:29 PM
Water and power tools don't mix at all. Definitely do not use water. A light touch and keep the sander moving and clear the aluminum dust frequently.
Ed
Ed
01-16-2015, 08:59 PM
Go back to post #6