MetalworkingFun Forum

My old setup just didn't get hot enough so needed a blower here are the pics of the build

Bouncy castle blower

[Image: P1020010_zpswrmgrbpu.jpg]

A cut off peace of down pipe and rubber reducer

[Image: P1020012_zpshsuomfem.jpg]

Holes to control air flow

[Image: P1020014_zpstw6dk3jq.jpg]

Sleeve to close air holes

[Image: P1020017_zpsdi5dxk14.jpg]

Fitted handle

[Image: P1020022_zpsme2mx8zf.jpg]

Fitted end reducer and blower pipe

[Image: P1020025_zpsrmksogkg.jpg]

All clamped down and finished it work a treat

[Image: P1020029_zpshkohh0pg.jpg]

I put a damper blade on mine

got rid of the hose and hooked the burner tube up right at the damper.

DA

I have the same fan
That will move a lot of air
John

(01-26-2015, 06:30 PM)doubleboost Wrote: [ -> ]I have the same fan
That will move a lot of air
John

Thanks for the push in the right direction John about the blower

mfletch