02-02-2016, 12:55 AM
Not sure if this is the right place or not, but a friend of mine just bought a Jet 16, 12 speed mill drill, and he needs a manual for it. Anyone out there have a copy, or have one they can scan? Thanks!
02-02-2016, 12:55 AM
02-02-2016, 03:43 AM
02-02-2016, 12:07 PM
There's not much to them that needs a manual. All it needs is a belt/speed chart so you can set it to 480 RPM and leave it forever. It's a universal speed for everything.
There's a zerk on mine for the lower spindle bearing. I greased it once about 35 years ago. Seriously, these are no-brainer machines. Just use 'em. Darn handy to have.
On edit: Use his fingers to spread oil on the ways. "Way-lube" if he can find it. It's a messy job but the little ball oilers don't work. They just spit the oil back out.
There's a zerk on mine for the lower spindle bearing. I greased it once about 35 years ago. Seriously, these are no-brainer machines. Just use 'em. Darn handy to have.
On edit: Use his fingers to spread oil on the ways. "Way-lube" if he can find it. It's a messy job but the little ball oilers don't work. They just spit the oil back out.