MetalworkingFun Forum

I just made myself a pair of ingot molds for aluminum, brass, and copper. I made one using a welder and the other I bolted together.





Patrick

Typically I used 3 or 4 inch wide by 6 to 8 inch long drops of channel iron. Welded a piece on each end and called it good. The taper on the inside of the channel made it easy to remove the ingots.

I just tested those molds out and they worked great. My youtube channel turned 1 today as well.



This next year is going to be nothing but better for my channel.
Patrick

Nice video. I thought only Grumpy Old Men ( GOM) were on the forum. Keep making those vdios. Thank you

Hey, I resemble that remark.

(11-08-2021, 09:29 AM)Dr Stan Wrote: [ -> ]Hey, I resemble that remark.

Just joking Doc