11-14-2021, 08:32 PM
I would like to get a X Axis Power Feed for my Mill Drill. But I’m not sure which one would work with my style of milling machine. I have a Craftex B1977 MD-30B. I have seen several videos with mill drills of other makes that pretty much look the same. Grizzly, King Canada, RF, etc. I’m hoping there is someone has a mill drill of this style that has installed a power feed that would know which one would fit my mill.
[attachment=17352]
[attachment=17350]
[attachment=17351]
Trevor
[attachment=17352]
[attachment=17350]
[attachment=17351]
Trevor