MetalworkingFun Forum

Full Version: 8" Grinder Coming
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I have an 8" grinder coming from HF tomorrow. I want to replace the wheels with ones that will be good for grinding high speed steel lathe bits. Can anyone recommend grits of wheels that would be good for that application? I will be buying Norton brand replacement wheels.

Ed

[attachment=17916]
I'd say a quality stone is more important than the grit. Hard to go wrong with Norton, though.

Personally, I'd rather have a medium and a fine, rather than the coarse and medium that most grinders have. I don't usually remove a lot of material, but I want to be able to put a really nice edge on tools. As a result, I rarely use the coarse side, and sometimes have to hand finish my cutting edges.
(06-09-2022, 09:49 AM)rleete Wrote: [ -> ]I'd say a quality stone is more important than the grit.  Hard to go wrong with Norton, though.

Personally, I'd rather have a medium and a fine, rather than the coarse and medium that most grinders have.  I don't usually remove a lot of material, but I want to be able to put a really nice edge on tools.  As a result, I rarely use the coarse side, and sometimes have to hand finish my cutting edges.

Excellent points. What one needs for deburring angle iron etc to be welded up is quite different from sharpening tools. The 8" grinder will also give you better cutting speeds. Let make one more suggestion, buy a true wheel dresser, one that also makes the wheel run true/balanced. When sharpening cutting tools the difference is amazing. Personally I like this one:  https://www.travers.com/product/geiger-7...67-803-010