MetalworkingFun Forum

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550

Been spending too much time in the cabinet shop, my ADD kicked in and moved downstairs for a couple of days. Always thought these pump oil cans looked neat, couldn't find the piece of brass tubing thats hiding somewhere in the shop or shed but found some stainless, so we ended up with a food grade oiler. Now I'll be able to precisely lube my fried potatoes.
[Image: OdfrVjR7R6QSFcDGUl0CiLiXL_ejR1b7rUdkxq8H...8-h1191-no]

[Image: OdfrVjR7R6QSFcDGUl0CiLiXL_ejR1b7rUdkxq8H...8-h1191-no]

[Image: qUBfkLAHwNp_izpdQxdmoON2jlzRAZpB1EYWXoHK...4-h1191-no]

Ooooh, that's nice! Drool

I have a few of the Eagle 66 oilers and I love them, but being all brass they don't tolerate abuse very well. They are top heavy and fall over easily. And they get dented up just as easily when they fall. Sad

They are excellent at what they do though.

My son started building electric guitars. He needed a way to accurately radius the fret board. A 12 inch radius.
We thought about building a jig that used the rotary table on the mill, but decided a stand alone unit would be beter.
We made two sets of quadrants with a 12 inch radius from some scrap 1/2 inch polyethylene Then a simple base and slide for the router. The slide has 1/8th plexi to guide a bushing on the base of the router.
Mount the neck, then go back and forth with the router indexing the cut to form the radius.

[Image: xrD_mB6WcsMFleGpqpAXUA9KwXXuOyOZAopXv5k7...00-h800-no]

[Image: xrD_mB6WcsMFleGpqpAXUA9KwXXuOyOZAopXv5k7...00-h800-no]

[Image: mb5fGUgRTeie0YPbeqiMNF5WNtVkVaBmp2TwUraB...00-h800-no]

[Image: sGSJ_5Ztmll3sg09cY6TRyhuTAav3NB6DHFdQ16z...00-h800-no]

[Image: HfF1iPzn9_zDjXpozQmI4vgar3E9XxSPtWCLLYJF...00-h800-no]

[Image: Vzc_0FnCk_ZOSauWEv2VzBhqUbhGvJWe2gPz4LJZ...00-h800-no]

Looks good Greg. It must save a heck of a lot of planing!

Is that Baltic Birch plywood you used or just a good cabinet grade?

Tom

Thanks Tom,
A bit of drawing on my etch a sketch drafting software, still haven't forced myself to learn TurboCad that Ed so generously gave me.
The base is MDF we had kicking around from counter tops, its very stable, the top is indeed Baltic Birch, I use it for cabinet drawers so there's always scraps kicking around. Nice stuff to work with and still made in Russia. The last time I bought some they had to open a new crate, comes packed in a wooden crate with Russian writing on it.

After seeing a build by Stefan Gotteswinter on his channel I blatantly stole some of his design and built a carbide hone.
Sorry no photos of the build, my camera phone died.
Recycled a small 1800 rpm motor from the tilting mechanism in a hospital bed. Cut away the gearbox and matted a pulley to the 1/4 gear it had for a shaft. The disk spins at 500 rpm, speed stollen from Accu-Finish.
The disks came from China via Aliexpress 800,1000 and 2000 grit at about $1.50 each plus shipping.
The aluminum backing plate has a centering hub, two drive pins and two magnets to secure the disks. Interestingly I epoxied the magnets in, the epoxy expanded as it cured, had to grind the magnets down to sit flush.
Leaves a near mirror like finish on carbide, photo doesn't show it on the old insert I tired.

[Image: 2pJMGgjLw0uN9Yz3xDid5zdqPESnm-IB3RvMu8_i...2-h1179-no]

[Image: 2pJMGgjLw0uN9Yz3xDid5zdqPESnm-IB3RvMu8_i...2-h1179-no]

[Image: -uci-ASE3QW-7iCV1JvLecx-IwI4FeOj2_ohp8vL...2-h1179-no]

[Image: 7L6R0DK3sh7B1rf4vEwpplRNgEBQG1s60QdVpow2...2-h1179-no]

Looks good Greg. Thumbsup

What is the curved slot for in the table?

Tom

Nicely done Greg. Stefan would be proud.

I know he doesn't like using cast iron for a lap surface but I've never had any problem with mine getting a mirror finish on my hand scraper blades using diamond paste on the lap. But it is too big and too fast to lap carbide inserts anyway. Blink

(01-09-2020, 09:22 PM)TomG Wrote: [ -> ]Looks good Greg.

What is the curved slot for in the table?

Tom

I'm guessing a protractor arm (pivot hole in the front of the plate) for holding the angle of the insert.

That is the plan Willie. Though after trying it on an insert Im not sure its necessary. Will build it anyway.
Forgot to mention, used a wrinkle finish powder coat on it, really liking powder coat, little cleanup and its dry as soon as it cools.

f350ca

Highpower

f350ca

TomG

f350ca

f350ca

TomG

Highpower

Highpower

f350ca