Posts: 258
Threads: 13
Joined: Aug 2012
Location: USA
08-21-2012, 09:47 PM
(This post was last modified: 08-21-2012, 09:48 PM by SnailPowered.)
The butt and frame of the gun are indeed bent rode or tube. I like the simplicity of it. It definitely makes me think of "end of the world" type gun which is really cool to me. They have another that is more complicated and Weapons Guild members compiled a lot of information on it. I will see if I can retrieve that stuff as well. I mostly posted those for the barrel machine. Just figured that since I was posting the one I might as well post the other.
Elijah
No, it's a full satellite system that comes in like 5 hard cases with wheels and weighs entirely too much. It isn't great but the fact that I have this much internet while sitting in my tent is super nice!
SnailPowered, proud to be a member of MetalworkingFun since Aug 2012.
Posts: 537
Threads: 15
Joined: Jun 2012
Location: Cambridge, England
Ahh, so you're not stateside at the moment? I have a Cousin that just came home a month ago. It was nice to still have him on FB while he was there.
If you are OS and can't say, at least know that you've got a lot of support on this Forum.
Regards
Rick
Whatever it is, do it today, Tomorrow may not be an option and regret outlasts fatigue.
Posts: 258
Threads: 13
Joined: Aug 2012
Location: USA
I don't think there is any problem with me saying I'm stuck in the EXTREMELY dusty Afghan Southlands
I appreciate the support!!
SnailPowered, proud to be a member of MetalworkingFun since Aug 2012.
Posts: 21
Threads: 0
Joined: Jul 2012
Location: Macon, Ga.
Snail is on the Bomb Squad. I think the technical term is EOD. So every night when you say thanks, say an extra for him and all the other service men and women out there.
pamrick, proud to be a member of MetalworkingFun since Jul 2012.
Posts: 8,739
Threads: 313
Joined: Feb 2012
Location: Arizona/Minnesota
(08-23-2012, 08:20 PM)pamrick Wrote: Snail is on the Bomb Squad. I think the technical term is EOD.
Welcome to the forum. Please post an introduction in the "Introductions" section if you'd like so we can get to know you a little better.
Happy to have you join the forum.
Ed
Posts: 258
Threads: 13
Joined: Aug 2012
Location: USA
Welcome Pamrick!! Pamrick and I have gotten to know each other pretty well from Weapons Guild. Glad to see you here!
I guess the weather is still too nice to be working inside huh? ;) I look forward to seeing this finished!!
SnailPowered, proud to be a member of MetalworkingFun since Aug 2012.
(07-11-2012, 08:30 PM)TomG Wrote: ![[Image: 008_5.JPG]](http://photos.imageevent.com/tomgriffin/buildingthestevensfavorite/large/008_5.JPG)
Machining the oval head on the screws with a form tool.
Tom, sorry to be so slow here and bring up stuff from a while ago, but its takes me time to wade through a lot of these posts.
I have never thought of using a form tool for repetitive shapes. My question is though, in the picture it looks like the form shape is larger than half and "passes" the centre point and would be kinda rubbing as the work rotated "up" not cutting as it were on the "down" side? Or is that just perspective?
Phillip
Posts: 3,795
Threads: 183
Joined: Jun 2012
Location: Farmington Hills, Michigan
(09-01-2012, 04:48 AM)ferryman Wrote: Tom, sorry to be so slow here and bring up stuff from a while ago, but its takes me time to wade through a lot of these posts.
I have never thought of using a form tool for repetitive shapes. My question is though, in the picture it looks like the form shape is larger than half and "passes" the centre point and would be kinda rubbing as the work rotated "up" not cutting as it were on the "down" side? Or is that just perspective?
Phillip
Phillip,
The tool does indeed extend past center. I do it that way because it's easier to grind and set up the tool. To keep it from rubbing on the backside, I just cheat it off center a couple of thousandths. Doing it this way leaves a nice, clean radius without the tit at the center you would get with the tool on dead center.
Tom
Posts: 537
Threads: 15
Joined: Jun 2012
Location: Cambridge, England
It also doesn't hurt that as the tool goes past centre the radius on the other side of centre turns back toward the chuck, curving well away from the tool.
Regards
Rick
Whatever it is, do it today, Tomorrow may not be an option and regret outlasts fatigue.
![[Image: TomsTechLogo-Profile.png]](http://tomstechniques.com/wp-content/uploads/2013/11/TomsTechLogo-Profile.png)