more stuff - Printable Version +- MetalworkingFun Forum (http://www.metalworkingfun.com) +-- Forum: Machining (http://www.metalworkingfun.com/forum-5.html) +--- Forum: Projects (http://www.metalworkingfun.com/forum-7.html) +--- Thread: more stuff (/thread-1022.html)

more stuff - monkers - 11-30-2012 Here are some more things Ive made. Parts washer, I had a shop brake the 16ga sheet metal "tub" and also the top. They sheared the end caps and I welded it together about 15 years ago. It has a pump in the tub with a manifold I made so you can use just the straight fluid, or one with fluid going through a brush. I used Loc Line for the line from the manifold. It also has a spin on filter to help keep the fluid clean, filter is from Napa and I think it is a diesel truck fuel filter if I remember right. New base for my Craftsman drill press, made of 2"x3"x 3/16" tube with 1" flat stock on the top, two pieces welder together and ground smooth. Its what I had lying around so thats why I used it lol. Next is a stock rack, also made about 15 years ago. I have 3 more sections that are in storage with the rest of my equipment. After the divorce I am finally starting to be able to work again. I have a small shop that I rent, so room is tight. Hopefully soon I can bring some more of my equipment down. Hanger for the creeper RE: more stuff - sasquatch - 11-30-2012 Great bunch of photos and great nicely done projects!! Thanks for posting these. RE: more stuff - monkers - 11-30-2012 Thank you! RE: more stuff - DaveH - 11-30-2012 Craig, Very nice, I especially like the base you made for the drill press DaveH RE: more stuff - monkers - 11-30-2012 Lol thank you!! Its rugged haha RE: more stuff - ETC57 - 11-30-2012 Great looking projects Craig, Oh and Welcome to the forum, glad to have you on board. Jerry. RE: more stuff - monkers - 11-30-2012 Thank you!