+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machining (http://www.metalworkingfun.com/forum-5.html)
+--- Forum: Projects (http://www.metalworkingfun.com/forum-7.html)
+--- Thread: Jet JMD 18 project (/thread-1184.html)
RE: Jet JMD 18 project - EdK - 02-15-2013
(02-15-2013, 01:25 AM)f350ca Wrote: If its only 220 with no neutral going to the machine its not a good idea to power the light off one leg. You'd have to return on the ground wire. I've done it with 110/24 volt transformers to operate contactors but even that's a no no by code.
Greg is absolutely correct. Don't do it. It's not worth the risk.
Ed
RE: Jet JMD 18 project - stevec - 02-15-2013
Monkers, I guess we can assume then that your power cord is only a 2 wire plus ground and not a 3 wire plus ground (the third wire being white/neutral)?
RE: Jet JMD 18 project - monkers - 02-15-2013
Ill have to look at the cord again but i think you are correct stevec
RE: Jet JMD 18 project - Highpower - 02-15-2013
[attachment=4491]
You can download the owners manual here if you don't already have one.
RE: Jet JMD 18 project - monkers - 02-15-2013
Thank you!!
RE: Jet JMD 18 project - krv3000 - 02-16-2013
coming a long nicely
RE: Jet JMD 18 project - monkers - 02-16-2013
thanks krv3000, I got the cross members welded in today, that the base bolts to, got the top plate sheared and I set it in place and drilled the mounting holes, gotta finish welding it tomorrow....
RE: Jet JMD 18 project - monkers - 02-18-2013
got the top piece sheared, then rounded the edges drilled the holes and welded it on
![[Image: 2013-02-18_11-34-26_252.jpg]](http://i1181.photobucket.com/albums/x427/monkers1212/2013-02-18_11-34-26_252.jpg)
RE: Jet JMD 18 project - monkers - 03-13-2013
ok, been a while, Ive been dealing with some nonsense with the ex-wife......on a side note, the legalities are done, anyone want to buy a four wheeler, snowmobile and enclosed trailer lol......
So, I got back to work on the stand in between all the other stuff, heres how it sits now. Still have to make the drawer, need more plywood first.
![[Image: 2013-03-12_20-38-06_817.jpg]](http://i1181.photobucket.com/albums/x427/monkers1212/Jet%20Mill%20Drill/2013-03-12_20-38-06_817.jpg)
![[Image: 2013-03-12_20-37-47_788.jpg]](http://i1181.photobucket.com/albums/x427/monkers1212/Jet%20Mill%20Drill/2013-03-12_20-37-47_788.jpg)
![[Image: 2013-03-12_20-37-28_342.jpg]](http://i1181.photobucket.com/albums/x427/monkers1212/Jet%20Mill%20Drill/2013-03-12_20-37-28_342.jpg)
RE: Jet JMD 18 project - DaveH - 03-14-2013
Monkers,
That does look nice
DaveH