MetalworkingFun Forum
Need a project - Printable Version

+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machining (http://www.metalworkingfun.com/forum-5.html)
+--- Forum: Projects (http://www.metalworkingfun.com/forum-7.html)
+--- Thread: Need a project (/thread-2100.html)

Pages: 1 2 3


RE: Need a project - EdK - 04-30-2014

(04-29-2014, 05:13 PM)TomG Wrote: My tutorial on building a set of stack blocks is an excellent project for the budding millwright, if I may say so myself. Big Grin

I designed it with with the beginning machinist in mind and it includes many common machining operations on mostly the mill, but some on the lathe as well. The good thing is that when you are done building them, they are something that you'll use almost every time you fire up the mill.

Stack Block Tutorial

Tom

I can vouch for this. I use mine all of the time.

Ed


RE: Need a project - ironman - 04-30-2014

Okey guys, here are some pictures for you Drool

I really dont have a clue what all of these are used for..well, not entirly true, because i know some of these are steels for the lathe, but i dont know exactly how and what purpose they are made for.

[Image: 20140430-214959.jpg]

[Image: 20140430-215006.jpg]

[Image: 20140430-215013.jpg]

[Image: 20140430-215022.jpg]

[Image: 20140430-215029.jpg]

[Image: 20140430-215035.jpg]

[Image: 20140430-215044.jpg]

[Image: 20140430-215058.jpg]

The bits inside the boxes are basically the same as the two smaller ones on the left side, just different sizes:
[Image: 20140430-215111.jpg]

[Image: 20140430-215117.jpg]


RE: Need a project - ironman - 04-30-2014

Wait... i have more DroolDroolDrool

Also found this in a yet unopened box, guess it belongs to the lathe, but i can sure use it on the mill too (there was so much tools at the old mans house i forgot to bring home all the boxes from my storage, and found an extra box today). Dont want to brag, but i payed $160! for all this, including the lathe, mill, drillpress, sheetmetal cutter, flypresses etc etc..

[Image: 20140430-215650.jpg]

Can someone tell me what this is??

[Image: 20140430-215703.jpg]

[Image: 20140430-215714.jpg]

Cutting tools for the mill?
[Image: 20140430-215721.jpg]

What are these for?

[Image: 20140430-215730.jpg]

For woodmilling?

[Image: 20140430-215737.jpg]

[Image: 20140430-215744.jpg]

[Image: 20140430-215752.jpg]


RE: Need a project - DaveH - 05-01-2014

Marius,
one pic at a time.
Pic 1, left hand side is a 'roughing end mill' on a Morse taper (3?) with a draw bar.
Right hand side is an 'end mill' on a Morse taper (3?) with a draw bar.

Pic 2, look end two 'slot mills' or some call 'center cutting end mills' used mainly for cutting slots.

Pic3, as Pic 2, look like 'slot mills'

The end mills are sometimes referred to as 2 flute, 3flute or 4flute and whether they are center cutting or not.

Smiley-eatdrink004
DaveH


RE: Need a project - DaveH - 05-01-2014

Marius,
I think some of the items you may know what they are, so pick a pic with an item you are not sure of and we will do our best to explain what it is and what it is used for. Thumbsup
Smiley-eatdrink004
DaveH


RE: Need a project - Mayhem - 05-01-2014

One item (or set) per pic would be extremely useful.

The items set you query as being for 'wood milling' appears to be a very nice counterboring set. You select a pilot to fit a hole and then a cutter to suit the size of the hole you want to cut. A common application would be to counterbore for a socket head cap screw to sit flush with the surface.

http://www.arceurotrade.co.uk/Catalogue/Cutting-Tools/Counterbores


RE: Need a project - ironman - 05-02-2014

(05-01-2014, 08:30 AM)DaveH Wrote: Marius,
I think some of the items you may know what they are, so pick a pic with an item you are not sure of and we will do our best to explain what it is and what it is used for. Thumbsup
Smiley-eatdrink004
DaveH

Thanks Dave, i will do. Was planning to yesterday night, but im running out of time all the time. Yesterday was tractor day Big Grin Figured it out, and now it runs like a dream.


RE: Need a project - ironman - 05-02-2014

(05-01-2014, 08:07 PM)Mayhem Wrote: One item (or set) per pic would be extremely useful.

The items set you query as being for 'wood milling' appears to be a very nice counterboring set. You select a pilot to fit a hole and then a cutter to suit the size of the hole you want to cut. A common application would be to counterbore for a socket head cap screw to sit flush with the surface.

http://www.arceurotrade.co.uk/Catalogue/Cutting-Tools/Counterbores

Yes, it came out a little bit "messy", im sorry. I`ll try to do one picture at the time.
Okey, so they are not for wood, but will work on steel? That would be very nice.


RE: Need a project - ironman - 05-02-2014

Okey, lets start with this picture:

[Image: 20140430-215022.jpg]

Number them 1,2,3 from left.


RE: Need a project - EdK - 05-02-2014

Number 1 is a center drill. If it's a 60 degree center drill then it's typically used to drill the 60 degree tapered hole which allows you to turn parts between centers on your lathe using lathe centers.

Number 2 is an end mill used to mill stock.

Number 3 is 17428

Ed