+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machining (http://www.metalworkingfun.com/forum-5.html)
+--- Forum: Projects (http://www.metalworkingfun.com/forum-7.html)
+--- Thread: Poor-Man's Toolpost Grinder (/thread-2646.html)
Poor-Man's Toolpost Grinder - aRM - 04-26-2015
[attachment=10586]
Made this for my Foot-Pedal Dremel Rotary Tool.
Chuck takes a 6mm sized shank permitting usage of a vast array of Cutters, Carbide Burrs, Diamond wheels/Burrs, Stones etc which are easily available.
Works nicely.
Need to exercise our mind to the limitless possibilities available with this.
aRM
RE: Poor-Man's Toolpost Grinder - schor - 04-26-2015
(04-26-2015, 11:43 AM)aRM Wrote: Made this for my Foot-Pedal Dremel Rotary Tool
Chuck takes a 6mm sized shank permitting usage of a vast array of Cutters, Carbide Burrs, Diamond wheels/Burrs, Stones etc which are easily available.
Works nicely
Need to exercise our mind to the limitless possibilities available with this
aRM
I did the same thing to clean up the jaws on an old chuck. Worked great.
RE: Poor-Man's Toolpost Grinder - Mayhem - 04-26-2015
Nicely done. One of those is on my list of projects .