+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machinery (http://www.metalworkingfun.com/forum-10.html)
+--- Forum: Lathes (http://www.metalworkingfun.com/forum-11.html)
+---- Forum: Lathe Tooling (http://www.metalworkingfun.com/forum-19.html)
+---- Thread: CCMT Tool Holder (/thread-2657.html)
Pages:
1
2
CCMT Tool Holder - EdK - 05-02-2015
Does anyone know of a source for a CCMT tool holder that can make use of the 100 degree corners for 32.XX sized inserts? I have one for the smaller 21.XX inserts but haven't found one for the larger inserts.
Ed
RE: CCMT Tool Holder - Mayhem - 05-02-2015
Have a look at the ToolMex web site.
RE: CCMT Tool Holder - EdK - 05-02-2015
(05-02-2015, 10:14 PM)Mayhem Wrote: Have a look at the ToolMex web site.
No luck there.
Ed
RE: CCMT Tool Holder - PixMan - 05-03-2015
I've checked with Mitsubishi, NTK and Kyocera, nothing. I'm not saying someone doesn't have it, but if those three who specialize in small screw-down insert holders don't have it, you aren't going to have an easy time of it.
What's the maker and designation of the one you do have?
RE: CCMT Tool Holder - EdK - 05-03-2015
Thanks for checking Ken. The one I have is a Micro 100. They only make them for the smaller insert size though.
Ed
RE: CCMT Tool Holder - Mayhem - 05-03-2015
You've got a mill Ed...
I did check the Toolmex site and they do them for negative inserts only. I knew I had seen them there.
RE: CCMT Tool Holder - EdK - 05-03-2015
(05-03-2015, 10:43 AM)Mayhem Wrote: You've got a mill Ed...
...
Not yet.
Ed
RE: CCMT Tool Holder - Mayhem - 05-03-2015
1/2 a mill???
RE: CCMT Tool Holder - Highpower - 05-03-2015
SECO has one, but I didn't bother to register just to find out how much they cost.
https://www.store.secotools.com/webapp/wcs/stores/servlet/CatalogSearchResultView?storeId=10205&langId=-1&catalogId=10056&pageSize=10&beginIndex=0&sType=SimpleSearch&coSearchSkuEnabled=true&field2=0&fieldOperator2=GREATER_EQUAL&searchTerm=13316
RE: CCMT Tool Holder - the penguin - 07-07-2015
(05-03-2015, 08:11 PM)Highpower Wrote: SECO has one, but I didn't bother to register just to find out how much they cost.
https://www.store.secotools.com/webapp/wcs/stores/servlet/CatalogSearchResultView?storeId=10205&langId=-1&catalogId=10056&pageSize=10&beginIndex=0&sType=SimpleSearch&coSearchSkuEnabled=true&field2=0&fieldOperator2=GREATER_EQUAL&searchTerm=13316
$96