MetalworkingFun Forum
toys for the boys - Printable Version

+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machining (http://www.metalworkingfun.com/forumdisplay.php?fid=5)
+--- Forum: Projects (http://www.metalworkingfun.com/forumdisplay.php?fid=7)
+--- Thread: toys for the boys (/showthread.php?tid=321)



toys for the boys - krv3000 - 04-17-2012

hi I picked these up at a boot sale. A toy motor and a mamod hammer. The motor was stripped and given a good clean and it runs well on 6 volt. The hammer the brace was bent. Straightened that out the pulley was held on by a brass screw which the head had come off. I tried to remove it but with no luck so I just filed it down to blend in to the pulley then I drilled and tapped M2 to fit a grub screw right pics.

[attachment=836] [attachment=837]

[attachment=838] [attachment=839]

[attachment=840] [attachment=841]

[attachment=842] [attachment=843]


RE: toys for the boys - DaveH - 04-17-2012

Bob,
The hammer did come up nice - smart Smiley-signs107,

Just have to paint the motor now Big GrinBig GrinBig Grin

Smiley-eatdrink004
DaveH