+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machining (http://www.metalworkingfun.com/forum-5.html)
+--- Forum: Gunsmithing (http://www.metalworkingfun.com/forum-27.html)
+--- Thread: CZ455 (/thread-3978.html)
Pages:
1
2
RE: CZ455 - Roadracer_Al - 02-07-2019
I did get to the range today, and was pleased with the improvement, but recognize that I have some additional room for improvement.
I tried out Federal Premium Match.
Groups shrank to about 1.25 -- mostly in the 1" range with the occasional flyer.
I've discovered that on my buddy's loaner optic (a Bushnell) the reticle is more than 1/2 moa! Just like machining, you can only be as precise as your measuring/aming tools.
RE: CZ455 - TomG - 02-07-2019
The ranges are open here, but I just can't do it. Target shooting and shivering don't go well together.
Tom
RE: CZ455 - Roadracer_Al - 02-21-2019
The sight I chose was highly recommended on RimfireCentral. It's a Mueller 8x32x44 with a target reticle and 1/2 MOA adjustments.
I also procured an inch/lb reading 1/4" drive torque wrench, which was previously missing from my wrench drawer.
I'll get it mounted and shoot next week and see how things go.