MetalworkingFun Forum
Todays Project - What did you do today? - Printable Version

+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machining (http://www.metalworkingfun.com/forum-5.html)
+--- Forum: Projects (http://www.metalworkingfun.com/forum-7.html)
+--- Thread: Todays Project - What did you do today? (/thread-727.html)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549


RE: Todays Project - What did you do today? - Pete O - 11-06-2016

So Rob, you went to 2 Aldi outlets and bought all their wall cabinets, did you go to another Aldi and buy all their milling machines?


RE: Todays Project - What did you do today? - RobWilson - 11-07-2016

Rotfl Rotfl Aye something like that Pete  Big Grin

Anyway Pete  what plans/projects do you have in mined that require the use of a universal dividing head ?  



Rob


RE: Todays Project - What did you do today? - Dr Stan - 11-07-2016

(11-07-2016, 03:50 PM)RobWilson Wrote: Rotfl Rotfl Aye something like that Pete  Big Grin

Anyway Pete  what plans/projects do you have in mined that require the use of a universal dividing head ?  



Rob

I bet he will have no trouble finding lots of uses for the UDH, including helical gearing. BTW Pete, excellent job on the casting & machining of the banjo. Smiley-signs107


RE: Todays Project - What did you do today? - Pete O - 11-07-2016

Thanks, but there's a reason that I took the photos from 5 feet away! It's functional but the finish is less than pretty. That aside, the ability to produce a finished part from start to finish is very rewarding.

One project for the universal div head is the 127-tooth transposing gear for my lathe, along with the rest of the set that were missing. I'm sure other things will come along. I particularly like the idea of experimenting with helical gears, just for the heck of it. If I ever get the hang of that, I might make all my change gears helical. Although I can barely hear the spur gears over the phase converter anyway...


RE: Todays Project - What did you do today? - Dr Stan - 11-08-2016

I strongly recommend fabing up some gear train covers.  I imagine you shut down when you have a visitor, but if you have a senior moment one Ah sh!t ! cancels out at least 100 attaboys.

BTW, don't ask how I know this. Yikes


RE: Todays Project - What did you do today? - RobWilson - 11-09-2016

Evening Lads 

Well made a wee bit more progress with my large shelf tonight ,I was pushed on by the arrival  today of my second order of plastic storage tubs . (I needed somewhere to put them )

First section I did the other day , this replaces an older shelf I had up across the door ,this one is higher . The door will be replaced in the spring with something more to my needs ,I really dislike up and over doors . 

[Image: P1140300_zpsfimthhpm.jpg]

So I welded up the right hand section tonight ,I had to use an old oil filed welded to do the welding as I could not get to the MIG  ,way to much crap in the way   Slaphead

[Image: P1140303_zpswbwvbelh.jpg]
[Image: P1140307_zpsqtaxggwj.jpg]

May tackle the left hand leg tomorrow night , well if its not raining . Bash


Rob


RE: Todays Project - What did you do today? - f350ca - 11-11-2016

Made up an oiling gun for the underside of my vehicles. With the amount of salt and liquid deicer they use here a layer of no-drip I think its vegetable based oil helps slow down the rust process.
I had a commercial gun that used a small canister that you were forever refilling. In the process I was covered with the stuff.
Had a pressure pot for paint kicking around, and modified an old high pressure paint gun. Drilled out the paint nozzle to .1 inch and opened up the front nozzle and silver soldered a length of 3/8 ss tubing.
With 40 psi on the pot and about the same on the gun it worked incredible. No mess at all and sprayed about 4 litres on each vehicle in about 20 minute each.

[Image: _KXoglll8O3XS-iu6z26eyVtxDWmKziP_Xsy0SNm...4-h1271-no]


RE: Todays Project - What did you do today? - Vinny - 11-11-2016

Are you spraying the entire underside? If so, I would think you'd make something that you just drive the car over and it sprays while the car slowly moves over it.


RE: Todays Project - What did you do today? - Mayhem - 11-12-2016

Don't give him ideas Vinny!


RE: Todays Project - What did you do today? - rleete - 11-12-2016

Not metal related in any way, but an enjoyable way to spend a Friday off work. Penmaking!

I have been hunting, or at least going to the hunting camp for about 21 years now. My Father-in-Law, Don, invited me for the first time the year before I married his daughter. Don passed of cancer 2-1/2 years ago, and I haven't hunted for 4 or 5 years now. But I still go down to hang with the (old) guys, who are all friends of Don from way back. I'm the "kid" at 55! Since they're all getting up there in years, the camp (which is jointly owned) is now up for sale. So it may be the last time we all get together at the old place.

We built the cabin up there by hand (no electricity) with rough sawn red oak. I took home some of the leftover boards, and have had them stashed in the garage for well over a decade. Today I sawed off a chunk and cut it up into pen blanks. Bullet pens, because it is, after all, hunting camp. These all got made today, although I did some of the prep work last night.

I present 6 red oak pens for some very dear friends:

[attachment=13898]