Minimal Clockmaking
#51
They are very nice Thumbsup Smiley-signs107
Smiley-eatdrink004
DaveH
Reply
Thanks given by:
#52
how thick is the plate that the gears are cut from?

nice work,
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
#53
Hi dallen

The blanks are 1/16" and are cut together, so its only one set up.



Happy Christmas.. Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#54
All the wheels, and ratchet done, next its the pinions.Smile

   

Regards Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#55
While I am waiting for the pinion wire to arrive, I have made a start on the plates.
Because the clock plates ETC will blue steel the clock now has a name (Dark Lady) and what better shape for the ends of the plates than the Ace of spades.

   

Plodding on.
Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#56
Cool,, looks great!!
sasquatch, proud to be a member of MetalworkingFun since Jul 2012.
Reply
Thanks given by:
#57
Looking good Brian! I like the idea of the blue steel plates, although you may need to nickel plate the brass stuff to maintain the dark lady allure.

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
#58
For today's offering i made the posts that hold the plates apart. The top post has to have a cross drilling to take a brass bush so a flat was filed in the lathe using the fileing rest, and marked out for drilling.

   

   

Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#59
Plate and Pillar assembly.

   

Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#60
Nicely done - looks very nice Smiley-signs107
I see you have one of those brass 'twirly' things 6820
Smiley-eatdrink004
DaveH
Reply
Thanks given by:




Users browsing this thread: 4 Guest(s)