09-13-2012, 05:27 AM
(09-12-2012, 11:24 PM)starlight_tools Wrote: What is the material of the D1-4 Adapter plate you got from Enco? Steel, Semi-Steel or Cast and what RPM is it rated for, did it specify? T4C is stated as Cast Iron, but have not checked as far as what RPM.
Walter
Walter,
The D1-4 adapter plate is cast iron and Enco does not rate them. I suppose one could call Enco and see if they know, but then I wouldn't necessarily believe what they told me.
Ed