10-12-2013, 05:50 PM
Finally got a couple of racks made for storing threaded rod and small bar stock. Nothing fancy, started with 22 gauge 36" wide stock (that was the bottom of the pile. Cut 7.5" by 18" strips then punched holes, which was a real pain! I actually had my wife use the Whitney punch, the enlarged to .75" then to 1.25 with the Greenlee KO set. A .75 flange along each edge. It's pop riveted together, pretty solid, better than I thought. The plan is to screw them to the wall, but need to find the empty space!
oldgoaly, proud to be a member of MetalworkingFun Forum since Jun 2013.