10-16-2013, 10:47 AM
Ed
Chuck is going to stay with the T&C Grinder, already have 3 jaw, 4 jaw, 5C and ER 40 for the lathe.
Steve
The chuck actually came mounted on the B&S #13 when I got it. It was mounted to the faceplate. I have just ordered a few chuck plates for this unit along with the universal head, a radius wheel truing grinding attachment and a live centre driver.
I found a complete set of 11 collets on fleabay last night for 220 us plus shipping so they are already on their way.
Walter
Chuck is going to stay with the T&C Grinder, already have 3 jaw, 4 jaw, 5C and ER 40 for the lathe.
Steve
The chuck actually came mounted on the B&S #13 when I got it. It was mounted to the faceplate. I have just ordered a few chuck plates for this unit along with the universal head, a radius wheel truing grinding attachment and a live centre driver.
I found a complete set of 11 collets on fleabay last night for 220 us plus shipping so they are already on their way.
Walter
starlight_tools, proud to be a member of Metalworking Forum since Apr 2012.