04-26-2015, 01:12 PM
BINGO!
That chart you posted is the same one I go by Dave.
As it shows, for cutting any pitch showing an 'N' in the table you only use the lines marked with an actual number. And another 'gotcha' on the chart is where it shows '1 - 3'. That does not mean use lines 1 through 3! (1,2,3)
It means use ONLY lines 1 -or- 3.
That chart you posted is the same one I go by Dave.
As it shows, for cutting any pitch showing an 'N' in the table you only use the lines marked with an actual number. And another 'gotcha' on the chart is where it shows '1 - 3'. That does not mean use lines 1 through 3! (1,2,3)
It means use ONLY lines 1 -or- 3.
Willie