07-26-2015, 10:34 AM
I don't have a 5C step chuck unfortunately.
Spindle speed at 2800
Feeding at 200mm/min
DOC 0.25mm / pass
1mm 2 flute cutter
Spindle speed at 2800
Feeding at 200mm/min
DOC 0.25mm / pass
1mm 2 flute cutter
Wongster
http://www.wongstersproduction.com
Proud to be a member of MetalworkingFun Forum since Mar 2012.
http://www.wongstersproduction.com
Proud to be a member of MetalworkingFun Forum since Mar 2012.