08-02-2018, 08:02 AM
Started sawing the timbers for the car port. This white pine was at the limit of the tractor, had to take the forks off and lift it with chains back on the arms. Got two 6x10s, two 3x6s for the bracing, two 2x6s and a 1x10 from it. About 240 board feet of lumber.
Yesterday I moved them into the shop with Saddie's help.
Started cutting the joints when I got a call wondering if I could chamfer the bolt holes on a small rim. Reground a 1 5/8 bit to match the angle. First project that wouldn't fit on the table of the drill press.
Yesterday I moved them into the shop with Saddie's help.
Started cutting the joints when I got a call wondering if I could chamfer the bolt holes on a small rim. Reground a 1 5/8 bit to match the angle. First project that wouldn't fit on the table of the drill press.
Free advice is worth exactly what you payed for it.
Greg
Greg