Here's a video some of you may enjoy of a job we are currently running in our Okuma Cnc lathe.
But first.....here's a couple pics so you can see what they are.
![[Image: 20130112_132517.jpg]](http://i203.photobucket.com/albums/aa90/wrustle/20130112_132517.jpg)
These are artillery brush adapters for the U.S. Army. We have 935pcs on this order. The material we are using is 1.250" dia. 1018 CRS.
![[Image: 20130112_132533.jpg]](http://i203.photobucket.com/albums/aa90/wrustle/20130112_132533.jpg)
Here's the video......enjoy!!
http://youtu.be/tWF9kXa44e8
Best Regards,
Russ
PS: And YES Ken......I should be using an inserted drill for the thru hole.
Honestly......I completely forgot about buying the .515" tips for the .500" drill body I have......DOH!!!......and now we're stuck running two shifts Saturday and Sunday to get these done.........UGH!
But first.....here's a couple pics so you can see what they are.
These are artillery brush adapters for the U.S. Army. We have 935pcs on this order. The material we are using is 1.250" dia. 1018 CRS.
Here's the video......enjoy!!
http://youtu.be/tWF9kXa44e8
Best Regards,
Russ
PS: And YES Ken......I should be using an inserted drill for the thru hole.
Honestly......I completely forgot about buying the .515" tips for the .500" drill body I have......DOH!!!......and now we're stuck running two shifts Saturday and Sunday to get these done.........UGH!