How to Wind a Coil Spring on the Metal Lathe

Hello There, Guest! Register

Thread Modes

How to Wind a Coil Spring on the Metal Lathe

Highpower Offline

Offline

JAFO

Posts: 4,369
Threads: 178
Joined: Feb 2012
Location: Missouri, USA

#16

06-24-2013, 12:02 PM

(06-24-2013, 09:46 AM)Mayhem Wrote: This is one time that I am glad my lathe speed goes down to 25 RPM :)

Lead foot! Rotfl

Rotfl

[Image: attachment.php?aid=4531]

Speaking of lead..... I have one of those little pocket sized plastic tubes filled with small diameter solder for electronics work. Makes handling and dispensing the solder very easy.
[Image: 370-052_s.jpg]

[Image: 370-052_s.jpg]

When I ran out of solder, instead of buying a new tube I decided to just wind a new coil from my large spool of flux core to replace it.
Here's a tip: Don't try to wind solder on a steel arbor. It doesn't want to come off afterwards, since it doesn't spring back and lead grabs steel pretty darn good. Slaphead

Slaphead

Next time I'll try nylon or acetal.

Smiley-signs125

Willie

Reply

« Next Oldest | Next Newest »

Messages In This Thread

How to Wind a Coil Spring on the Metal Lathe - by TomG - 06-23-2013, 02:50 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by Highpower - 06-23-2013, 03:29 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by doubleboost - 06-23-2013, 03:44 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 06-23-2013, 04:20 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by f350ca - 06-23-2013, 04:59 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 06-23-2013, 05:50 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 06-23-2013, 06:00 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by mattinker - 06-24-2013, 05:40 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by Highpower - 06-24-2013, 06:09 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 06-24-2013, 06:26 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 06-24-2013, 06:30 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by Mayhem - 06-24-2013, 09:46 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by Highpower - 06-24-2013, 12:02 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by arvidj - 06-25-2013, 08:59 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 06-26-2013, 05:14 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 06-24-2013, 10:03 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 06-24-2013, 11:00 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 06-24-2013, 11:16 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by Highpower - 06-24-2013, 12:12 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 06-24-2013, 12:18 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by Hawkeye - 06-24-2013, 08:17 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by Highpower - 06-24-2013, 08:54 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 06-25-2013, 04:51 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by chucketn - 06-28-2013, 06:33 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 06-28-2013, 06:39 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by DaveH - 06-25-2013, 06:19 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 06-25-2013, 06:45 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 06-25-2013, 06:58 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by arvidj - 06-25-2013, 08:52 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 06-26-2013, 05:11 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by arvidj - 06-26-2013, 10:11 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by Highpower - 06-25-2013, 09:45 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by Mayhem - 06-26-2013, 06:24 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by arvidj - 06-26-2013, 10:09 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by Mayhem - 06-27-2013, 06:53 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 06-27-2013, 06:04 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by arvidj - 06-27-2013, 09:11 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 06-28-2013, 05:40 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 06-27-2013, 08:07 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 06-28-2013, 04:34 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 06-28-2013, 08:04 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by Mayhem - 06-29-2013, 10:33 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by arvidj - 06-30-2013, 08:24 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by Mayhem - 07-01-2013, 04:56 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 07-01-2013, 05:13 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by chucketn - 07-01-2013, 06:50 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 07-01-2013, 07:14 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by arvidj - 07-01-2013, 07:58 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 07-02-2013, 06:10 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by arvidj - 07-02-2013, 07:19 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by Mayhem - 07-03-2013, 06:48 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by arvidj - 07-03-2013, 08:54 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by arvidj - 07-03-2013, 11:12 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 07-03-2013, 09:15 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by arvidj - 07-03-2013, 10:39 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by chucketn - 07-03-2013, 09:33 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by arvidj - 07-03-2013, 10:34 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 07-03-2013, 02:10 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 07-03-2013, 02:12 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 07-03-2013, 02:13 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 07-03-2013, 02:15 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 07-03-2013, 02:23 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 07-03-2013, 06:59 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by oldgoaly - 07-16-2013, 07:44 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 07-16-2013, 08:10 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by oldgoaly - 07-16-2013, 09:49 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 07-17-2013, 06:17 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by steamtoys - 07-24-2013, 05:49 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 07-24-2013, 06:20 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by Mayhem - 07-24-2013, 06:35 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 07-24-2013, 06:44 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 07-24-2013, 09:02 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by Mayhem - 07-24-2013, 09:04 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 07-24-2013, 09:08 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by Mayhem - 07-24-2013, 09:15 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by EdK - 07-24-2013, 11:34 AM

RE: How to Wind a Coil Spring on the Metal Lathe - by oldgoaly - 07-31-2013, 12:38 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by stevec - 07-31-2013, 01:41 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 07-31-2013, 12:55 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by oldgoaly - 07-31-2013, 02:23 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by oldgoaly - 08-01-2013, 03:19 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 08-01-2013, 03:48 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by oldgoaly - 08-01-2013, 04:08 PM

RE: How to Wind a Coil Spring on the Metal Lathe - by TomG - 08-01-2013, 04:59 PM

Users browsing this thread: 1 Guest(s)