09-06-2013, 07:48 PM
Another day of distractions but made a little headway.
![[Image: IMG_0753.jpg]](https://lh5.googleusercontent.com/-x9PuKIE0FRU/Uip2Yc-dtsI/AAAAAAAABdY/clsDw_xxc3U/s1280/IMG_0753.jpg)
Still need to clean up the back of the mortises with a chisel and shave the cheeks? down to fit.
![[Image: IMG_0754.jpg]](https://lh6.googleusercontent.com/-MqrWi9wr6hc/Uip2YczKhrI/AAAAAAAABdU/LSdSuxdcIqw/s1280/IMG_0754.jpg)
I realize it isn't metal work but I can continue with a few shots of the timber work if anyone is interested. Been too busy at other projects the machine shop is feeling neglected.
Still need to clean up the back of the mortises with a chisel and shave the cheeks? down to fit.
I realize it isn't metal work but I can continue with a few shots of the timber work if anyone is interested. Been too busy at other projects the machine shop is feeling neglected.
Free advice is worth exactly what you payed for it.
Greg
Greg