01-09-2014, 02:56 PM
you didn't say how big a diameter, I cut wood on my mill from time to time, one thing you have to watch for is splintering but you said your doing a radius so I don't see that as a problem. If its a straight sided slot that your doing I would us an endmill router bits are designed to run at router speeds.
have a vacumn cleaner hose handy to suck up the chips while running you can catch a lot of the dust by holding the hose up to the cutter.
DA
have a vacumn cleaner hose handy to suck up the chips while running you can catch a lot of the dust by holding the hose up to the cutter.
DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!