I am having trouble soldering the blades. I have 45% silver solder, and past flux bought at the welding supply that is supposed to be for silver solder. The flux is a clear paste. The solder does not flow enough to penetrate the joint.
I will post pictures of my jig and a attempted joint later today.
BTW, I'm using a Mapp gas torch.
Chuck
I will post pictures of my jig and a attempted joint later today.
BTW, I'm using a Mapp gas torch.
Chuck
Micromark 7x14 Lathe, X2 Mill , old Green 4x6 bandsaw
The difficult takes me a while, the impossible takes a little longer.
The difficult takes me a while, the impossible takes a little longer.