03-05-2014, 02:19 PM
(03-05-2014, 01:42 PM)chucketn Wrote: Eurika! Flux from MSC did the job. 2 tries with first blade, 1 try with second! I tested the joint on the first one by flexing in my hands and then sucessfully coiling the blade!
Thanks Tom for the jig, and thanks to all that perservered through my learning! What makes it special is I used solder I found in my Dad's torch kit!
Chuck
I love happy endings!
Keep in mind that if you do get some blades that break, it's likely due to the solder. The 45% you used is quite a bit weaker than 50-55%. Just something to keep in mind.
Nice job on the fixture.
Tom
![[Image: TomsTechLogo-Profile.png]](http://tomstechniques.com/wp-content/uploads/2013/11/TomsTechLogo-Profile.png)