03-02-2014, 12:14 PM
The rack looks fine ? so don't know how the damage was done. Seams like your right on the full engagement but it still traveled fine, only felt rough intermittently. (didn't line up to one turn of the pinion)
Dallen, if the whole tooth was missing I wouldn't rely on the bronze but just to rebuild the tips it might be worth a shot. Will consider the new gear though, its not a bad idea.
I don't do a lot of brazing as of late. The rod I have got damp in the last move and storage so the flux is flacking off, will the brush on flux for silver solder work.
Thanks for the thoughts guys.
Dallen, if the whole tooth was missing I wouldn't rely on the bronze but just to rebuild the tips it might be worth a shot. Will consider the new gear though, its not a bad idea.
I don't do a lot of brazing as of late. The rod I have got damp in the last move and storage so the flux is flacking off, will the brush on flux for silver solder work.
Thanks for the thoughts guys.
Free advice is worth exactly what you payed for it.
Greg
Greg