07-01-2014, 07:44 PM
Hi Wongster,
I get the same sticking trouble with the MT taper on my mill
all the hammering won't shift the tool,i use a good dose of pipe freeze
spray allways works, why not try it. Cheers. Ronnie.
I get the same sticking trouble with the MT taper on my mill
all the hammering won't shift the tool,i use a good dose of pipe freeze
spray allways works, why not try it. Cheers. Ronnie.
bigman1, proud to be a member of MetalworkingFun Forum since Feb 2014.