Tooling Cabinets - restoration
#20
Well the top coat is on.......John will be gutted but its Machine Green not grey Yikes , I have most shelves , cupboards and quite a few things this green in the workshop so am sticking to it, except for a few machines that should be grey like the Harrison lathe, anyway the world is too grey in general so green is more cheerful and classy :thumbup:

One thing with the green is its a nightmare to get a photo showing what the colour actually looks like, I dont think any of these shots are spot on colour wise and these are the best of the bunch.

All cabinets , lightly sanded, wheels masked off and the floor swept then wet to try to keep the dust down.

[Image: Cabinetsgreen001.jpg]

I was getting pushed for space really as I was close to the next cabinet when spraying so had to be carefull where I was and also the air line and I use a lamp to shine on the area as the light not too good for spraying, The draws were also a bit dodgy for balance and getting knocked so it was just a case of be careful and keep to the system of working around the items. This is the first light coat of green.

[Image: Cabinetsgreen002.jpg]

Looking a bit more green after two coats.

[Image: Cabinetsgreen003.jpg]

This is them after three coats and the draws have dried enough to be carefully balanced back into the cabinets, I had a 5 litre tin of paint and its used 4 litres to do the three cabinets ! , spraying the insides and draws seems to eat the paint but at least they won't rust. The other shots are of the corners that were musroomed over and damaged. Overall they have came out fine , not as good as you would like if it was your classic car pride and joy but they are green and shiny.

[Image: Cabinetsgreen007.jpg]

[Image: Cabinetsgreen011.jpg]


[Image: Cabinetsgreen012.jpg]

I have sprayed the door locking rods silver and got them fitted along with the draw handles , locks etc. I have to work out the best way to do the shelves now , I think I might spray the shelf frames and drill / cut the old wood shelf incerts to fit collets etc then if they work well, I will make some new wood ones. The other thing they need is new plywood tops.

The phtotos here are more like the colour but still not right really they are actually somewhere in between the last shots above and these more bright ones in reality. Things always look better with a few parts put back on too.

[Image: Cabinetsgreen021.jpg]


[Image: Cabinetsgreen024.jpg]

I like the tall cabinet with the external top draws the best as it has a more classic look about it, it would make a nice drinks cabinet for Doubleboost to keep his red wine and Brown ale in !
Rob if I snuff it I will leave the cabinets to the lads so you can paint them what ever colours you like and just be thankful you will only have to lghtly scotchbright them off then paint Smile,
I panelwiped them off before the green paint as I thought there might have been a large R.W daubed on in Mcdonalds burger grease Rotfl

Cheers Mick.
Micktoon, proud to be a member of MetalworkingFun since Sep 2012.
Reply
Thanks given by:


Messages In This Thread
Tooling Cabinets - restoration - by Micktoon - 08-12-2014, 06:58 PM
RE: Tooling Cabinets - restoration - by Mayhem - 08-12-2014, 07:37 PM
RE: Tooling Cabinets - restoration - by f350ca - 08-12-2014, 07:56 PM
RE: Tooling Cabinets - restoration - by TomG - 08-13-2014, 06:46 AM
RE: Tooling Cabinets - restoration - by DaveH - 08-13-2014, 02:43 PM
RE: Tooling Cabinets - restoration - by RobWilson - 08-13-2014, 02:49 PM
RE: Tooling Cabinets - restoration - by awemawson - 08-13-2014, 03:08 PM
RE: Tooling Cabinets - restoration - by Micktoon - 08-13-2014, 04:53 PM
RE: Tooling Cabinets - restoration - by krv3000 - 08-14-2014, 04:46 PM
RE: Tooling Cabinets - restoration - by Micktoon - 08-18-2014, 05:42 PM
RE: Tooling Cabinets - restoration - by PixMan - 08-18-2014, 09:02 PM
RE: Tooling Cabinets - restoration - by Micktoon - 08-19-2014, 03:02 AM
RE: Tooling Cabinets - restoration - by krv3000 - 08-19-2014, 03:59 AM
RE: Tooling Cabinets - restoration - by Mayhem - 08-19-2014, 05:52 AM
RE: Tooling Cabinets - restoration - by Arbalest - 08-19-2014, 09:13 AM
RE: Tooling Cabinets - restoration - by RobWilson - 08-19-2014, 12:39 PM
RE: Tooling Cabinets - restoration - by Micktoon - 08-20-2014, 09:56 AM
RE: Tooling Cabinets - restoration - by DaveH - 08-20-2014, 11:04 AM
RE: Tooling Cabinets - restoration - by PixMan - 08-20-2014, 10:09 AM
RE: Tooling Cabinets - restoration - by RobWilson - 08-20-2014, 11:53 AM
RE: Tooling Cabinets - restoration - by Mayhem - 08-20-2014, 05:39 PM
RE: Tooling Cabinets - restoration - by Shawn - 08-20-2014, 08:18 PM
RE: Tooling Cabinets - restoration - by schor - 08-20-2014, 08:43 PM
RE: Tooling Cabinets - restoration - by Mayhem - 08-21-2014, 07:08 AM
RE: Tooling Cabinets - restoration - by Micktoon - 08-21-2014, 05:18 PM
RE: Tooling Cabinets - restoration - by Micktoon - 08-24-2014, 05:36 PM
RE: Tooling Cabinets - restoration - by DaveH - 08-25-2014, 07:53 AM
RE: Tooling Cabinets - restoration - by krv3000 - 08-25-2014, 01:06 PM
RE: Tooling Cabinets - restoration - by tackit - 08-25-2014, 09:11 PM
RE: Tooling Cabinets - restoration - by Shawn - 09-19-2014, 02:24 AM
RE: Tooling Cabinets - restoration - by TomG - 09-19-2014, 09:15 AM



Users browsing this thread: 1 Guest(s)