that long rod threaded on both ends should be the drawbar, see if it will screw into the arbor that the chuck is on by dropping it down the spindle from the top, if it screws in take brass hammer and hit the end of it while holding onto the chuck or put a wadded up rag under it to catch the chuck on.
do a google search for Microlux and see if you can find the manual
do a google search for Microlux and see if you can find the manual
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!