12-02-2015, 09:30 AM
The hone for the cylinders arrived so it was on to the mill to bring the bore to size.
Then a quick rub with the hone.
Finally the base flange was reduced and the face for the head gasket machined.
Now just the oil blacking to do.
The blank weighed 1.5 Kg the finished cylinder 300 g.
Brian.
Then a quick rub with the hone.
Finally the base flange was reduced and the face for the head gasket machined.
Now just the oil blacking to do.
The blank weighed 1.5 Kg the finished cylinder 300 g.
Brian.
