07-23-2015, 09:09 PM
on the burner the center line is for compressed air and the small line that hooks to the side of the nozzle adapter is for waste oil or fuel oil. you really don't need the spin vane that is on the nozzle but you do need some way to center it in the tube.
I'm being a little slow with getting a video up of how I operate my burner for you, its been pretty hot here lately, anyway the humidity is high enough to wring water out of the shade but I will get around to it.
you will need a regulator that can pass a pretty high volume of gas.
I'm being a little slow with getting a video up of how I operate my burner for you, its been pretty hot here lately, anyway the humidity is high enough to wring water out of the shade but I will get around to it.
you will need a regulator that can pass a pretty high volume of gas.
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!