08-30-2015, 05:58 PM
John,
If you let me know what the worm ratio is on your dividing head and what the hole counts are on the indexing plates you have available we can probably come up with something that will allow you to make a 63 tooth gear. Maybe not a "perfect" gear but a "pretty damn close" one.
Arvid
If you let me know what the worm ratio is on your dividing head and what the hole counts are on the indexing plates you have available we can probably come up with something that will allow you to make a 63 tooth gear. Maybe not a "perfect" gear but a "pretty damn close" one.
Arvid