12-27-2015, 02:11 PM
You are correct Arvid, that is 0.090 mm. I also put a mic on it and it's 0.035", so that saves me a trip to HF. The rollers that are in it are the only ones that came with it.
Just checked the manual, it does recommend the use of a flow meter, but not to use an AR/CO2 flow meter with straight CO2. Funny thing is, HF doesn't sell a flow meter, they just have a straight regulator for their welders. I got mine from USA Weld. While the manual does say 10-30 CFH, it doesn't mention pressure, so I'll start at 25 PSI as Paul suggests.
Just checked the manual, it does recommend the use of a flow meter, but not to use an AR/CO2 flow meter with straight CO2. Funny thing is, HF doesn't sell a flow meter, they just have a straight regulator for their welders. I got mine from USA Weld. While the manual does say 10-30 CFH, it doesn't mention pressure, so I'll start at 25 PSI as Paul suggests.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique
the nobucks boutique etsy shop | the nobucks boutique