07-26-2016, 08:51 PM
I also own a 1911, and the unique doesn't have a barrel link, so it's not *quite* the same in that the rear of the barrel doesn't rock down when the action moves. But, yes, it's recoil-operated.
What are your thoughts on the feed ramp mis-match?
It seems to me that I have two options: make a spacer that is applied to the frame to get the feed ramps to align, or I could machine the back of the barrel.
The barrel machining option would require re-chambering the barrel since it will be shortened by ~1/8". I looked on Dave Manson Reamers, and they have a .22lr with an integral pilot for $45, which seems a fair price.
What are your thoughts on the feed ramp mis-match?
It seems to me that I have two options: make a spacer that is applied to the frame to get the feed ramps to align, or I could machine the back of the barrel.
The barrel machining option would require re-chambering the barrel since it will be shortened by ~1/8". I looked on Dave Manson Reamers, and they have a .22lr with an integral pilot for $45, which seems a fair price.