The Rust-Oleum web site is having problems today, but I finally found the paint to which I was referring:
https://www.rustoleum.com/product-catalo...ive-enamel
BTW, I'm not very particular regarding machine tool paint, I'm mostly interested in having my machines look good and function well. The pic of my Fray mill is an example. Changed out the motor from 3 phase to single phase and increased the HP rating. As soon as my foot heals I'll be modifying it so the head faces out, not to the right as it is currently configured.
I'll admit to a color selection that was not well thought out. I used International Harvester white (off white or cream) on a 9" South Bend which showed dirt & grease like you would not believe.
https://www.rustoleum.com/product-catalo...ive-enamel
BTW, I'm not very particular regarding machine tool paint, I'm mostly interested in having my machines look good and function well. The pic of my Fray mill is an example. Changed out the motor from 3 phase to single phase and increased the HP rating. As soon as my foot heals I'll be modifying it so the head faces out, not to the right as it is currently configured.
I'll admit to a color selection that was not well thought out. I used International Harvester white (off white or cream) on a 9" South Bend which showed dirt & grease like you would not believe.