[PROJECT] Bridgeport Rebuild

[Old Minger]

   

The table went on easy wish I could say the same for the lead screw. After about an hour of messing about I could not get it to engage the rear split nut so decided to remove the table and I packed the gap between the nuts with some felt. This way it should them being forced together by the lead screw and it might help soak up some of the lube oil. So second time of asking and all went well.

Next up will be the ram and the ram adaptor and I hope to get this done over the Christmas break.

Merry Christmas and a Happy new year to one and all.

Cheers

John