Good to know, I was not expecting tight tolerances, but reasonable & usable. I will apply your knowledge and inspect the product when received. Find them crap they will go back.
Somehow I've acquired mills that need the smaller sizes in the set. Just a fill in for now, generally use 3/8, 1/2 and 3/4 tooling.
I noticed your collets are sold by Travelers, just purchased an end mill and sending a couple in for sharping. Reading the website they have and own their tool manufacturing facility here in the good old USA.... that's different hope that = quality ...
Thanks for the insight,
Greg
Somehow I've acquired mills that need the smaller sizes in the set. Just a fill in for now, generally use 3/8, 1/2 and 3/4 tooling.
I noticed your collets are sold by Travelers, just purchased an end mill and sending a couple in for sharping. Reading the website they have and own their tool manufacturing facility here in the good old USA.... that's different hope that = quality ...
Thanks for the insight,
Greg
Magazines have issues, everything else has problems