02-14-2018, 11:57 PM
I figured it is probably best to glue it up and then coat it, as the edges need to be trimmed after mounting so best waterproofed after they are trimmed. The panel is flat, it's the piece at the top of this photo. There's a print for the tacho face as well.
This is how it looked a couple of weeks ago.
I've experienced severe 'mission creep' with this tractor project, started out as a few repairs and has turned into something close to a restoration.
Good idea to experiment on a magazine. Apparently there's a product intended to waterproof maps, might look for it.
This is how it looked a couple of weeks ago.
I've experienced severe 'mission creep' with this tractor project, started out as a few repairs and has turned into something close to a restoration.
Good idea to experiment on a magazine. Apparently there's a product intended to waterproof maps, might look for it.
Lathe (n); a machine tool used in the production of milling machine components.
Milling Machine (n); a machine tool used in the production of lathe components.
Milling Machine (n); a machine tool used in the production of lathe components.