05-03-2021, 03:11 PM
Bought this 5" vise from Amazon. The castings look real good for a Chinese made vise. The company that makes it has been making tools for 70 years so they must have the casting process down. I'm disassembling it to clean and deburr it.
Forward 5" Vise
Ed
One of the screws on the right came out with a bit of difficulty. I was concerned that it was the thread in the casting but I tried the good screw in the suspect thread and it was fine. I'll replace both screws with higher quality ones. Actually I'll probably do that with all of the hardware.
Forward 5" Vise
Ed
One of the screws on the right came out with a bit of difficulty. I was concerned that it was the thread in the casting but I tried the good screw in the suspect thread and it was fine. I'll replace both screws with higher quality ones. Actually I'll probably do that with all of the hardware.